How To Install Laminate Hardwood

The seams should be staggered at least 12 inches from any adjacent seam.

How to install laminate hardwood. Clean your subfloor of. Besides looking like wood termites are not attracted by them and they are easier to install. Fill any holes in your subfloor.

Laminate flooring can be installed on stairs or anywhere else that you would install hardwood flooring. Then rotate down to lock. Pour water in the cuts allowing it to soak underneath the carpet.

If your laminate has a built-in underlayer you may install it right on top of the hardwood. Install the laminate floor planks with the tongue side facing the wall some manufacturers recommend you cut off the tongue edge of planks that face walls. If the new flooring does not have the built-in underlayer simply roll out and tape your underlayment to the wood floor and begin installing the laminate.

Laminate flooring is a great alternative to wood. Install your laminate flooring one row at a time. Use the hammer to tap the end of the screwdriver and get it under the carpet strip.

Planks should be installed parallel to the main light source of the room. To pull them up just place the tip of the screwdriver at the edge of the strip right where it meets the floor. Cutting around a bullnose corner is something you need to know.

Butt the sheets together and seal the seams with the tape recommended by the manufacturer. Use the tongue-and-groove edges to connect one plank to another. Align tongues into the grooves of the long and short sides of the planks.