How To Put Tongue And Groove Flooring In

Nail in the boards one by one.

How to put tongue and groove flooring in. He goes step by step through the process of installing the floor and. Then paint the backs and sidings of the planks using a primer and a brush. Be careful that you are spacing the floor boards evenly.

Lay a sheet of backerboard over the thinset screwing it to the floor. By lining up the ridge side of a board with the groove side of another board and attaching them a snug seam is created. The boards are fitted with protruding which is referred to as the tongue and concave which is the groove.

A 50lb bag will cover 75 to 80 square feet using a trowel. Keep the backerboard level while allowing drying for 24 hours. Glueing To Concrete Floor Gluing the tongue and groove flooring to concrete is pretty similar to a floating floor but there are minor differences.

Nailing In the old days carpenters used small hard-cut nails to hand-nail their floors. Installing tongue and groove flooring is actually quite easy as the floorboards are fitted together like jigsaw puzzle pieces. Step 1 - Glue The Joints.

Priming At first lay the planks facing down across the porch. Constructing with tongue and groove works by using boards that have one side with a protruding ridge the tongue and a groove along the entire length of the boards opposite side. Similar to the above instructions you need to apply wood adhesive along your woods grooved edges.

This is a physically demanding as well as time consuming process. All four sides of the boards have tongues and grooves for easy fitting. Another way to install tongue and groove flooring is to drive the nails at an angle through the tongue part of the piece of hardwood into the subfloor.